DeWalt DC825B manual Definitions Safety Guidelines, EC-Declaration of conformity

For more information, please contact DEWALT at the address below, or refer to the back of the manual.

Director Engineering and Product Development Horst Grossmann

DEWALT, Richard-Klinger-Strase 11, D-65510, Idstein, Germany 16/08/2007

EN G L I SH

Definitions: Safety Guidelines						CAUTION: Indicates a potentially
The definitions below describe the level of severity						hazardous situation which, if not
						avoided, may result in minor or
for each signal word. Please read the manual and
						moderate injury.
pay attention to these symbols.
						CAUTION: Used without the safety alert
DANGER: Indicates an imminently
						symbol indicates a potentially hazardous
hazardous situation which, if not avoided,
						situation which, if not avoided, may
will result in death or serious injury.
						result in property damage.
WARNING: Indicates a potentially
						Denotes risk of electric shock.
hazardous situation which, if not
avoided, could result in death or						Denotes risk of fire.
serious injury.
		DC820	DC822	DC825	DC827	DC830	DC832	DC835	DC837	DC840	DC845
LpA (sound pressure)	dB(A	91	91	90	90	91	91	90	90	91	90
KpA (sound pressure
uncertainty K)	dB(A)	3	3	3	3	3	3	3	3	3	3
LWA (acoustic power)	dB(A)	102	102	101	101	102	102	101	101	102	101
KWA (acoustic power
uncertainty K)	dB(A)	3	3	3	3	3	3	3	3	3	3

Vibration total values (triax vector sum) determined according to EN60745:

Vibration
emission value	m/s²	9.7	9.7	13.7	13.7	9.7	9.7	13.7	13.7	9.7	13.7
Uncertainty K	m/s²	2.3	2.3	5.3	5.3	2.3	2.3	5.3	5.3	2.3	5.3
The declared vibration emission value has been					EC-Declaration of conformity
measured in accordance with a standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be					DC820, DC822, DC825, DC827, DC830, DC832, DC835,
used in a preliminary assessment of exposure.
					DC837, DC840, DC845
WARNING: The vibration emission					DEWALT declares that these tools have been
value during actual use of the power					designed in compliance with:
tool can differ from the declared value					98/37/EC, 89/336/EEC, 2006/95/EC, EN 60745-1,
depending on the ways in which the tool					EN 60745-2-2, EN 55014-2, EN 55014-1.

is used. This could lead to a significant underestimate of exposure when the tool is used regularly in such a way.

An estimation of the level of exposure to vibration experienced during a given period of work should also take into account the times when the tool is switched off and when it is running idle in addition to the trigger time.

This may significantly reduce the exposure level over the total working period.

429