SpecificationsControls
Charger Input | 120V~ / 60Hz | |
|
| |
Motor Speed | ||
| ||
Battery | 12V, 1300mAh | |
(ITEM 68059) | ||
| ||
Chuck Capacity | 3/8" (10mm) | |
|
|
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1‑800‑444‑3353 as soon as
possible.
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
|
|
|
| Functions | |
Clutch | Gear Switch | |
Chuck Collar |
|
|
Collar |
|
|
Direction
Switch
Light
Trigger
Battery
Pack 
1.Trigger:
This is a variable speed tool.
Squeeze the Trigger more to increase speed, less to reduce speed.
The light will illuminate when the trigger is pressed.
2.Direction Setting:
: (towards front of drill)
Press switch from the right side of the drill to make the drill turn clockwise, usually for tightening or driving screws.
: (away from front of drill) Press switch from the left side of the drill to make the drill turn counterclockwise, usually for loosening or removing screws.
3.Clutch Collar:
1- 11: These settings control the amount of torque at the bit to prevent stripping bolts and screws or splitting wood.
Settings range from 1 - lowest torque - to 11 - highest torque.
: This setting prevents the clutch from slipping. It is used when drilling holes.
4.Gear Switch:
1: low gear, higher torque
2: high gear, faster speed
CAUTION To prevent drill damage, do not adjust any setting halfway between options.
Example:
Do not use the Drill with the Clutch collar set between settings 11 and 
.
SKU 68126 | For technical questions, please call | Page 8 |