Obligation signs
en | Wear eye | Wear a hard | Wear ear | Wear | |
protection | hat | protection | protective | ||
|
gloves
Wear
breathing protection
Symbols
Read the | Return waste | Volts | Direct current |
operating | material for |
|
|
instructions | recycling. |
|
|
before use |
|
|
|
RPM
Rated speed | Revolutions | Revolutions per |
under no load | per minute | minute |
Location of identification data on the power tool The type designation can be found on the type iden- tification plate and the serial number on the side of the motor housing. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department.
Type:
Generation: 01
Serial no.:
2. Description
2.1 Use of the product as directed
The SID
Working on materials hazardous to the health (e.g. asbestos) is not permissible. Do not use the battery as a power source for other unspecified appliances. Modification of the power tool or tampering with its parts is not permissible.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
The power tool should not be used for applications that require a precise torque. For applications that require a precise torque or where only a special limited torque is permitted, there is a risk of
Observe the information printed in the operating instructions concerning operation, care and maintenance. The power tool is designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
2