Makita LB1200F instruction manual Installing the guide rail

Page 7

Table	Trunnion

Hex bolts

Hex bolts

Secure table to trunnion using four hex bolts.

Pin

Table

Pin is inserted at time of shipping, so please pull it out.

Washer

Thumb screw

Guide rail

Installing the guide rail

• Fasten the guide rail with four each thumb screws and washers to the table.

7

Image 7

Contents Band Saw Safety Instructions SpecificationsDisconnect tools Additional Safety Rules for ToolPage Securing the band saw stand InstalationHow to load dust box Installing the guide rail Push stick Switch actionFunctional Description Lighting up the lampsReversing the fence Installing the Rip FenceClamping the rip fence Changing the band saw blade AssemblySaw blade Saw housing Upper blade guide Setting knob for belt tension Cutting speed adjustmentAligning the band saw blade Tensioning the Band saw BladeQuick release lever Upper blade guide adjustmentThrust bearing Bolt a Blade Adjusting the guide bearings Adjusting the thrust bearingAlign the lower blade guide Operation Sawing Connecting to vacuum cleanerSaw table tilt Accessories MaintenanceHow to move machine Makita Corporation