Makita Complete Manual for Your Cordless Saw Assembly and Safety - LB1200F

Page 10

Guide rail

Thumb screws

Dust cover

ASSEMBLY

Changing the band saw blade

CAUTION:

•Contacting the band saw blade even with the band saw blade at standstill may cause a personal injury.

•Saw blade is dangerous.

Be sure to wear gloves when handling saw blade in situations such as removing from packaging, mounting or replacing blade.

1.Loosen the two thumb screws for the right-guide rail, and slide the right-side rail to the right.

2.Open the upper cover and lower cover on the tool.

3. Hold the handle and pull the dust cover upwards to remove.

10

Image 10

Contents Band Saw Specifications Safety InstructionsAdditional Safety Rules for Tool Disconnect toolsPage Instalation Securing the band saw standHow to load dust box Installing the guide rail Lighting up the lamps Switch actionFunctional Description Push stickReversing the fence Installing the Rip FenceClamping the rip fence Assembly Changing the band saw bladeSaw blade Saw housing Upper blade guide Cutting speed adjustment Setting knob for belt tensionTensioning the Band saw Blade Aligning the band saw bladeUpper blade guide adjustment Quick release leverThrust bearing Bolt a Blade Adjusting the guide bearings Adjusting the thrust bearingAlign the lower blade guide Operation Sawing Connecting to vacuum cleanerSaw table tilt Accessories MaintenanceHow to move machine Makita Corporation