ENGLISH (Original instructions)
SPECIFICATIONS
| Model | BTD134 | BTD146 | |
|
| Machine screw | 4 mm - 8 mm | |
Capacities |
| Standard bolt | 5 mm - 14 mm | |
|
| High tensile bolt | 5 mm - 12 mm | |
| No load speed | 0 - 2,400 | 0 - 2,300 | |
| Impacts per minute | 0 - 3,200 | ||
| Overall length | 138 mm | ||
| Net weight | 1.2 kg (with battery BL1415) | 1.3 kg (with battery BL1815) | |
| 1.4 kg (with battery BL1430) | 1.5 kg (with battery BL1830) | ||
|
|
| ||
|
|
|
| |
| Rated voltage | D.C.14.4 V | D.C.18 V | |
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications and battery cartridge may differ from country to country.
•Weight, with battery cartridge, according to
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use. 
･ Read instruction manual.
Cd | ･ Only for EU countries |
| |
Do not dispose of electric equipment or | |||
| battery pack together with household | ||
| waste material! |
|
|
| In observance of European Directive | ||
| 2002/96/EC on waste electric and | ||
| electronic equipment, 2006/66/EC | on | |
| batteries and accumulators and waste | ||
| batteries and accumulators and their | ||
| implementation | in accordance | with |
| national laws, | electric equipment | and |
battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and plastic.
Noise
The typical
Model BTD134
Sound pressure level (LpA) : 92 dB(A)
Sound power level (LWA) : 103 dB(A)
Uncertainty (K) : 3 dB(A)
Model BTD146
Sound pressure level (LpA) : 93 dB(A)
Sound power level (LWA) : 104 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value
Model BTD134
Work mode : impact tightening of fasteners of the maximum capacity of the tool
Vibration emission (ah) : 12.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model BTD146
Work mode : impact tightening of fasteners of the maximum capacity of the tool
Vibration emission (ah) : 15.5 m/s2
Uncertainty (K) : 2.0 m/s2
•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.
•The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.
2