Williams Sound Model WIR 237 Model WIR 238 Model WIR 239 manual Additional Receiver Adjustments

Page 11

IMPORTANT: When you are done using the RX237, remember to UNPLUG the earphone, headphone, or neckloop from

the receiver’s jack. The receiver will not turn off until the earphone/headphone is removed from the unit.

Return the receiver to the charger when it is not in use!

ADDITIONAL RECEIVER ADJUSTMENTS

Balance Control: Use a small screwdriver to adjust the loudness bal- ance between the Left and Right Earphones. See page 12.

Tone Controls: Use a small screwdriver to adjust the tone for the left and right earphones. See page 12.

®

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model WIR Contents System Components System OverviewHearing Safety Safety InformationRecycling Instructions Pacemaker SafetySetting UP the TX238 Transmitter Connect the Transmitter Power Supply Stereo Operation MHz Mono Operation Setting UP the RX237 Receiver Additional Receiver Adjustments RX237 Receiver Front View Setting UP the RX238 Receiver RX238 Receiver Rear View Setting UP the RX239 Neckloop Receiver RX239 Receiver Rear View Case of Difficulty Limited Warranty Page WIR 238, WIR WIR RX237 Receiver WIR RX239 Receiver Page Williams Sound Corp. MAN 120C
Top Page Image Contents