BenQ RL2240H user manual Connect the PC video cable

Page 9

2. Connect the PC video cable

Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems.

To Connect the D-Sub Cable

Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from accidently falling out during use.

To Connect the DVI-D Cable

Connect the plug of the DVI-D cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from accidently falling out during use.

To Connect the HDMI Cable

Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device.

If there is more than one video transmission method available to you, you might want to take the picture quality of each video cable into consideration before making the connection.

-Better quality: HDMI / DVI-D

-Good quality: D-Sub

The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region.

3. Connect the headphones.

You may connect headphones to the headphone jack found on the back side of the monitor.

Either

Or

Or

How to assemble your monitor hardware

9

Image 9

Contents Page Care And Cleaning Power SafetyCopyright DisclaimerBenQ ecoFACTS Table of Contents CD-ROM Getting startedOptional accessory Video Cable DVI-DVideo Cable Hdmi Getting to know your monitor Control buttons Power buttonFront view Back viewAttach the monitor base How to assemble your monitor hardwareConnect the PC video cable Connect the power cable to the monitor Prepare the monitor and area How to detach the stand baseGetting the most from your BenQ monitor Click Finish Restart the computer How to install the monitor on a new computerHow to upgrade the monitor on an existing computer How to install on Windows 7 system Select Properties from the menu Click the Hardware tabClick Close Click the Monitor tab and the Properties button How to install on Windows Vista systemsControl panel How to adjust your monitorBasic menu operation To change the default settings, see Customizing By default, the key is the hot key for Display ModeFor Down/Decrease adjustment By default, the key is the hot key for Smart ScalingSetting up your own game mode Picture optimizationCustomizing the hot keys Using Smart Scaling Adjusting display modeAdjust the value You can resize your display by Smart ScalingNavigating the main menu Adjusts the horizontal position of the screen image Adjusts the vertical position of the screen imageDisplay menu Phase Adjusts the degree of difference between darkness Lightness Adjusts the balance between light and dark shadesPicture menu Brings out the dark shades by increasing the brightnessWith natural coloring. This is the factory default Color Adjusts the tone luminance. The default value is 3Adjusts the degree of how we perceive colors Adjusts the purity degree of colorsPicture Advanced menu Mode from Picture Mode. The screen will be divided into two Applies customized display settingsThis feature is provided to allow aspect ratios other than Displays the input image in its native resolutionDetected video signal Adjusts the display size to best suit your needsThis feature provides a highlight area to focus on certain Content, e.g. a YouTube video or an online gameFunction Range Save Settings menuAdjusts the audio volume Audio menuMutes the audio input System menu Use this to change the input to that appropriate to yourVideo cable connection type 日本語 Power saving mode Sets the time to power off the monitor automaticallyWhen this function is activated, Hdmi port will be Displays the current monitor property settingsFrequently asked questions FAQ TroubleshootingNeed more help?