Pyramat S 2000 manual Set-Up, Connection Methods, MP3 and Portable CD Player Connection

Page 4

SET-UP

1Unfold the top portion of the Sound Rocker until the backrest is flush with the seat portion.

11

FEE

 

 

 

 

T

 

 

OR

LESS

 

 

2Place the Sound Rocker so

that the control panel is less than 11 ft./3.5 meters from the power

source.

CAUTION: Keep fingers clear of the folding seam when folding or unfolding the rocker.

3Connect the 12-volt AC power adapter to the electrical outlet and then to the power AC port on the control panel.

4 Twist the volume knob to click on the power.

5Check the speakers on top to see if the Pyramat logo is lit up. Twist volume knob to power off the Sound Rocker, then proceed to the connection method shown below for your audio/video device.

CONNECTION METHODS

MP3 and Portable CD Player Connection

CAUTION: Power off all audio/video devices prior to proceeding with the Sound Rocker connection method.

1Turn the source knob on the control panel to MP3.

S O U N D

F U R N I T U R E

2Slip your player into the MP3 pocket on the side of the Sound Rocker.

S O U N D

F U R N I T U R E

3With the cord next to the pocket, connect the player to the Sound Rocker.

Note: For audio devices with a smaller input jack, use the supplied 2.5 mm mini plug adapter.

3

Image 4
Contents Item Number 10175001 Contents Safety WarningsFeatures Power AC portBefore YOU Begin Input RCA audio portsConnection Methods SET-UPMP3 and Portable CD Player Connection Video Game Console Connection RCA Audio Cable ConnectionCoaxial Cable Connection Audio/Video Device ConnectionMulti-User Connection Problem Possible Cause Troubleshooting GuideSolution Warranty Pyramat Service Center 877-591-1012 service@pyramat.comDo not Return to Store