TROUBLESHOOTING GUIDE
Problem | Possible Cause |
Unable to hear sound | The RCA audio cables are not |
| connected properly. |
| The AC power adapter is |
| disconnected from the electrical |
| outlet or the electrical outlet has |
| no power. |
| The source knob on the control |
| panel is in the wrong position. |
Unable to connect to the | Cables are incorrectly connected. |
gaming console |
|
Your video game console has a coaxial cable instead of an RCA audio cable
Sound only plays from one | RCA cables are incorrectly |
speaker. | connected. |
| Audio/video device has a single |
| MONO audio output (a common |
| problem when connecting to an |
| older TV or VCR). |
No sound will play from the RCA audio cables are incorrectly
Sound Rocker. | connected. |
Sound Rocker plays sound | Source knob is not on the correct |
from one source but not | setting. |
another. | RCA cables are incorrectly |
| |
| connected. |
Missing or broken cables or |
|
mini adapters. |
|
Missing or broken power |
|
adapter. |
|
Solution
Check the connection on your audio/video device. The RCA cables should be connected to the AUDIO OUTPUT jacks. Check the connection on your rocker. The RCA cables (red and white) must be in the AUDIO INPUT ports.
Check the plug on the AC power adapter. When properly connected with the volume knob on, the logo on the back of the rocker will illuminate.
If the Sound Rocker still doesn’t power up, try another electrical outlet.
Turn knob to input for video games and audio/video devices. Turn knob to MP3 for MP3 and portable CD players.
Check that the console’s RCA audio cables are connected to the Sound Rocker’s RCA audio cables (red to red and white to white).
Check that the Sound Rocker RCA audio cables (red and white) are connected to the AUDIO INPUT jacks on the rocker.
Check that the console’s RCA video cable (usually yellow) is connected to the VIDEO INPUT jack on the TV.
If your video game console has an RCA audio cable, then connect the RCA audio cable extenders to the red and white audio cables from the video game console. Connect the supplied RCA audio cable to the video game console’s red and white audio cables and plug into the input jacks on the Sound Rocker.
Use the instructions provided by the video game console’s manufacturer to hook up the video game console to an intermediary device (such as a TV, DVD, VCR, satellite receiver, etc.). Your intermediary device must have both a coaxial input jack (the standard jack for cable TV) and an RCA audio output jack.
Purchase an RCA replacement cable directly from the console manufacturer.
Check that all RCA audio connections are correct – red to red, white to white
If your audio source is mono only, as found mainly on older model TVs and VCRs, an RCA “Y” adaptor (1 male to 2 male; not included) is needed to send the signal to both Pyramat speakers. Please note: the use of this type of adapter will not produce a true stereo sound. For optimal performance, it is recommended that you connect your Pyramat product to stereo outputs only.
RCA audio cables (red and white) must be plugged in to AUDIO OUTPUT jacks in the source device (TV, VCR, etc.). If you are plugging the cables to the jacks in the front of your TV these are most likely AUDIO INPUT jacks.
See page 2 for the correct knob position for the device you are playing.
Check that all RCA audio connections are correct – red to red, white to white
Replace items immediately. Replacement cables and mini adapters can be purchased at your local audio accessory dealer.
Replace immediately with an authorized Pyramat power adaptor. Do not use the unit until the damaged power adapter has been replaced.
Need Help? Visit ou r website at www.pyramat.com send an
or call
6