![](/images/new-backgrounds/1004759/475939x1.webp)
Bluetooth® operations
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® device wirelessly.
Refer to the operating instructions of the Bluetooth® device for details.
≥If you intend to use an NFC (Near Field
1 Turn on the Bluetooth® feature of the device.
2 Press [
].
≥If “Panasonic BTT” is displayed on the Bluetooth® menu of the device, go to step 4.
3 Press and hold [jPAIRING].
≥“PAIrInG” will be displayed on the unit’s display and the unit will enter pairing standby mode.
PAIRING
≥If another Bluetooth® device is already connected, the connection will be terminated automatically.
4 Select “Panasonic BTT” from the Bluetooth® menu of the device.
≥If another Bluetooth® device is already connected, disconnect it.
≥“ConnECtEd” will be displayed on the unit’s display and the connection will be established.
CONNECTED
5 Start play on the Bluetooth® device.
20 VQT5F61
≥If prompted for the passkey, input “0000”.
≥You can register up to 8 devices with this system. If a 9th device is paired, one of the other registered devices will be replaced.
≥This system can only be connected to one device at a time.
≥When “Bluetooth” is selected as the source, this system will automatically try and connect to the last connected Bluetooth® device. If the connection attempt fails, try to establish a connection again.
≥If you switch the source, the Bluetooth® device will be disconnected.
≥If the image and sound are out of sync during playback, restart the playback application you are using. If the problem persists, connect the Bluetooth® device and this unit with an audio cable.
≥“Bluetooth Standby Mode” (> 30)
One-Touch Connection (Connecting by NFC)
For
Simply by touching an
1 Turn on the NFC feature of the device.
2 Touch and hold your device on the NFC touch area of this unit. (> 10)
≥If the unit is in standby, it will turn on, and “nFC” will be displayed on the unit’s display. Keep the device in contact with the unit.
≥When the Bluetooth® device is paired and connected, “ConnECtEd” is displayed on the unit’s display. Once the registration and connection of the Bluetooth® device is complete, move the device away from the unit.
≥If “ConnECtEd” is not displayed, change the touching position.
3 Start play on the Bluetooth® device.
≥When the connection is established, the playback may start automatically depending on the type of device being used.
≥The