4
3D Adapter
Battery Installation
The remote control requires one CR2025 lithium battery.
1
2
Emitter
1.Remove the cover.
To remove the battery, press on the retaining clip.
2.Insert the battery, positive side up. Be sure the retaining clip holds the battery securely.
3.Reinstall the cover.
Controls and Indicators
POWER | 3D STATUS |
IR Sensor
POWER 3D MODE
Adapter
POWER | 3D MODE |
Remote Control
POWER Light | Lit when power is on. |
|
|
3D STATUS Light | Lit during 3D signal processing. |
|
|
POWER Button | Allows manual override of auto on/off. Press to power |
| off the Adapter if it powers on when not needed, |
|
|
3D MODE Button | Allows manual selection of 3D format conversion. |
|
|
Please check