Mitsubishi Electronics 3DC-1000 manual Using the Adapter, Picture Troubleshooting, Normal

6

Using the Adapter

1. Position the emitter where there will be a clear path to the 3D glasses.

2.Power on the TV, the 3D video device, and

the 3D glasses.

Note: The 3D video device must be powered on before the 3D Adapter can power on.

3.If the 3D Adapter does not power on automatically when you power on the 3D video device, press the POWER button.

4.If the New Input Found screen displays, assign a name to the input. If you have an 833 series TV, name the input Game.

5.Start video from the 3D video device and wait a few moments for an image to appear.

6.Enable the TV’s 3D mode. For an 833 series TV, 3D settings are in the FX Gaming menu.

7.Select the Adapter’s 3D mode. Press the 3D MODE button to change.

•For ordinary 2D signals, keep the Adapter powered on and use 3D Mode Normal.

•For automatic detection of HDMI 1.4a 3D signals, use 3D Mode

Normal.

•For non-HDMI 1.4a 3D signals, press the 3D MODE button repeatedly until the picture appears correct.

Picture Troubleshooting

Blurry double image,	Two images, top-and-	Two images, side-by-
checkerboard format.	bottom format. Press	side format. Press
Turn on TV’s 3D mode.	3D MODE button to select	3D MODE button to select
Press 3D MODE button to	3D Mode for top/bottom.	3D Mode for side-by-side.
select 3D Mode Normal.

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.