Kramer Electronics RC-53D user manual Placing the Button Cap

Installing the RC-53D Faceplate, Button Caps and Labels

5.Retaining the orientation, place the six button caps on the buttons of the RC-53D.

Figure 8: Placing the Button Cap

6.Remove the protective foils from both sides of the Perspex (acrylic glass) windows.

7.Remove the protective foils from both displays.

8.Place the faceplate on the RC-53Dso that the four screw mounting holes are aligned.

9.Insert the four mounting screws and tighten with a screwdriver.

10.Install the volume control knob.

8 KRAMER: SIMPLE CREATIVE TECHNOLOGY