Panasonic SC-HT40 specifications Settings

Step 4 Settings

Change the settings to suit your equipment to the environment in which you are using it. Before making any changes, read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment's instructions.

DISTANCE

Enter the distance of the front, center a n d s u r r o u n d speakers from the seating position.

Change the distance so that the sound from all the speakers (except for the subwoofer) reaches you at the same time.

You can select distances between 3 and 30 feet.

The factory settings are:

Select "DISTANCE".

TUNE

Enter the setup mode.

DIG INPUT (digital input)

Settings Step 4

LR (front):	10 ft (feet)
C (center):	10 ft (feet)
S (surround):	5 ft (feet)

Change the digital input settings for TV or DVR/DVD-P to coaxial if your equipment doesn’t have an optical output terminal. (One of the terminals will remain unused, whatever the setting.)

The factory settings are:

TV:OPT1

DVR (DVR/DVD-P): OPT2

MENU

SETUP

RETURN

Press and hold.

DISTANCE

Select "DIG INPUT".

TUNE

DIG INPUT

Adjusting	C (center), SR (surround right) and SL (surround left) can be adjusted
speaker	between -10 dB and +10 dB, with 0 dB being the level of the front
	speakers. Adjust center and surround output to the same apparent
output	level of the front speakers.
level	For SUBW (subwoofer), you can select "SUBW - - -" so there is no
	output, "SUBW MIN" for minimum output, a level between 1 and 19,
	or "SUBW MAX" for maximum output. Adjust subwoofer output so it is
	balanced with the front speakers.
	Subwoofer output is easily influenced by the source. You can also
	change its level while playing something for better effect (➡ page 16).

RQTV0105

Output the signal.

-LEVEL

TEST

Press and hold.

TEST L

L C R SR SL SUBW

8