Pride Mobility Flight manual Error Codes, Care and Maintenance Warranty

14 Basic Operation Instructions

ERROR CODES

The battery condition meter will flash error codes when the FLIGHT controller detects an abnormal condition in the electrical system. All of the battery condition meter LEDs will flash a number of times quickly, then pause, then flash again. The battery condition meter will continue to flash the error codes until the problem is fixed. The table below identifies the individual error codes. If any of these error codes persist or if you experience any other problem with your power chair, con- tact your authorized Pride Provider.

Error Code	Probable Cause	Possible Solution
1	Possible stall timeout or user error	Release the joystick.
2	Battery Fault	Check the batteries and cables. Try
		to charge the batteries. The batteries
		may need to be replaced.
3	Left Motor fault	Check the left motor, connections,
		and cabling.
4	Right Motor Fault	Check the right motor, connections,
		and cabling.
5	Left Park Brake Fault	Check the left park brake, connections,
		and cabling.
6	Right Park Brake Fault	Check the right park brake, connections,
		and cabling.
7	FLIGHT Controller Module Fault	Check the communications connections
		and wiring.
8	FLIGHT Power Module Fault	Check the communications connections
		and wiring.
9	FLIGHT Communications Fault	Check the communications connections
		and wiring.
10	Unknown Fault	Contact your authorized Pride Provider.
11	Incompatible Controller Fault	Contact your authorized Pride Provider.

CARE AND MAINTENANCE

Refer to your power chair owner’s manual for proper cleaning and disposal instructions.

WARRANTY

For two (2) years from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of charge, the controller or any of its components found upon examination by an authorized representative of Pride to be defective in material and/or workmanship.

FLIGHT Controller www.pridemobility.com