POSIFLEX Business Machines KB3200 user manual III. Installation, Cable Connection

Page 15

III. INSTALLATION

A. CABLE CONNECTION

Take the cable CCBLA-055-2 out of the accessory bag. Connect the 6 pin DIN male plug of the cable to the 6 pin DIN female connector at the left of the bottom of the programmable keyboard. Connect the other end (5 pin DIN male plug) to the PC or a compatible system. Connect the PC keyboard or any other keyboard wedged input device such as a CCD scanner to the 5 pin DIN female connector at the bottom of the programmable keyboard if such connection is required.

For installation in a PS2 or a compatible system with a PS2 interface type KB3200, the cable in the accessory bag should be CCBLA-055-1. Connect the mini DIN 6 male plug of the cable to the PS2 or a compatible system. Do all the rest just like that for PC.

PC or PS2

Monitor

 

PC or PS2 KB

CCBLA-055-2 or

KB-3200

CCBLA-055-1

 

KB3200 Series User’s Manual

3 - 1

Image 15
Contents KB3200 Series Some Important Notes Table of Contents Page Overview Scope FeaturesModel Numbers Options AccessoriesPage France Qwerty RegionItaly GermanyPortugal NetherlandsSWEDEN/FINLAND SpainUnited States United KingdomPage Cable Connection III. InstallationUtility Installation Preparation HOT KEY ProgrammingInput the Content to be Programmed Enter HOT KEY Programming ModeExit HOT KEY Programming Mode Programming Utility KBM.EXE Quick Reference GuideAnswer Back Code Hardware Limitation Programming Utility KBW.EXEShortcut Utility RWM.EXE Keyboard Construction ApplicationPosition KEY-LOCK PRG REG Push KEY Switch AreaKEY TOP Replacement Page Magnetic Stripe Reader Slot Preloaded Pattern WIN NT Application Construction VI. Specifications∙ Code Type Reader application Mechanical