POSIFLEX Business Machines KB3200 user manual Exit HOT KEY Programming Mode

Page 19

such as the “Ctrl”, “Alt”, “Home”, any function key or arrow key or any key in the numerical keypad) on the standard PC or PS-2 keyboard are illegal inputs in this mode. The maximum number of key presses acceptable to any key by “hot key programming” is 32.

All the input from the standard PC or PS-2 keyboard in this mode will also be sent to the host computer. Any key press from the predefined programmable keyboard for data input in “hot key programming” is prohibited.

4. EXIT “HOT KEY PROGRAMMING” MODE

After the intended content of the key is completely entered, the user shall press the “hot key” again to notify the end of “hot key programming”. The programmable keyboard will give one beep to signify the normal exit of the “hot key programming” mode. Should there be any illegal entry in the content of the key or any other improper operation during the programming stage, the programmable keyboard will give three beeps to signify the failure of “hot key programming” and the key content is not changed. If the user pressed the “Esc” key to abort “hot key programming”, the programmable keyboard will also give three beeps immediately as a response to signify the abort.

KB3200 Series User’s Manual

4 - 3

Image 19
Contents KB3200 Series Some Important Notes Table of Contents Page Overview Scope FeaturesModel Numbers Options AccessoriesPage France Qwerty RegionItaly GermanyPortugal NetherlandsSWEDEN/FINLAND SpainUnited States United KingdomPage Cable Connection III. InstallationUtility Installation Preparation HOT KEY ProgrammingInput the Content to be Programmed Enter HOT KEY Programming ModeExit HOT KEY Programming Mode Quick Reference Guide Programming Utility KBM.EXEAnswer Back Code Hardware Limitation Programming Utility KBW.EXEShortcut Utility RWM.EXE Keyboard Construction ApplicationPosition KEY-LOCK PRG REG Push KEY Switch AreaKEY TOP Replacement Page Magnetic Stripe Reader Slot Preloaded Pattern WIN NT Application Construction VI. Specifications∙ Code Type Reader application Mechanical