Midi Channels, Keyboard | Akai MPK249 guide

MIDI Channels

Common Channel (Common Chnl): This setting determines which MIDI channel is the common channel (various controls can be assigned to the common channel in Edit Mode). The available settings are USB A1–A16, and USB B1–B16.

Note Display

Type: Determines whether the display will show a note by its pitch Value (e.g., C2, F#3, etc.) or by its MIDI note Number (e.g., 36, 54, etc.).

Keyboard

Important: Edit Mode contains other parameters that affect the keyboard but are saved only

with the Preset, not with the global settings. See the Edit Mode: Keyboard section for more information.

Curve: The keyboard's velocity curve. The available range is -50to +50. At a low value, the curve is flatter at low velocities, becoming much steeper at high velocities. At a high value, the curve is steeper at low velocities, becoming flatter at high velocities. At the maximum setting of +50, it takes very little force to generate a velocity value of 127.

Gain: An offset to keyboard's overall velocity sensitivity. The available range is -20to +20. At a low value, more force is required to generate a note. At a high value, less force is required to generate a note.

Black / White: An offset to the black keys' or white keys' overall velocity sensitivity. The available range is -20to +20. At a low value, more force is required to generate a note. At a high value, less force is required to generate a note.

Tip: These parameters are useful if you play the black keys and white keys differently (e.g., due to the higher position of the black keys, your preferred hand positioning, etc.).