FUNCTIONS (cont)
Sound Control Mode – Double tap the Sound Control Mode cubie to enter the Sound Control Mode. First, select the mode of SFX you would like the TouchCube to play. If the Sound Control face is yellow, this indicates the TouchCube is in Classic sound mode, an exact recording of the original Rubik’s® Cube. If the face is blue, it is in Modern sound mode, which is a pleasant swipe sound. Press and hold the Sound Control Mode cubie for one second to toggle between sound modes.
Counterclockwise:
Decrease Volume
Classic Sound Mode Modern Sound Mode
Next, set the volume. Swipe clockwise to increase the volume or counterclockwise to decrease the volume. The default setting for the TouchCube is volume level 4, and the Cube can be set from 0 (mute) to 8.
SLEEP MODE – If the TouchCube is idle for 60 seconds, it will automatically enter Sleep Mode. Press and hold the On/Off cubie to reactivate the TouchCube.
WHEN TO RECHARGE YOUR TOUCHCUBE
When the TouchCube is running low on batteries, it will begin to flash red and play a low battery warning tone. At this time, you will need to recharge your TouchCube, otherwise it may lose power and the Cube will go to sleep.
NOTE: It is recommended that you place the TouchCube in the charging display stand as soon as the low battery warning appears to prevent any atypical behavior while using the Cube.
46