Chapter 4
Advanced Configuration
Status > Device Info
The Device Info screen is the first screen you see when you access the
Status > Device Info
General
Firmware Version This displays the Adapter’s current firmware version.
LAN
MAC Address Displays the MAC Address as seen by other devices on your local area network.
IP Address Displays the Adapter’s IP address, as it appears on your local network.
Subnet Mask The Adapter’s Subnet Mask is shown here.
Default Gateway The Adapter’s Default Gateway is shown here.
Wireless LAN
Wireless Radio Displays whether the wireless networking functionality of the Adapter is enabled or disabled.
Status Displays the AP association status.
WISH Indicates whetherWISH (Wireless Intelligent Stream Handling) is active or not. WISH is used for prioritizing applications over the wireless network.
MAC Address Displays the MAC Address as seen by other devices on your wireless network.
Network Name (SSID) This displays the name of the wireless network or SSID.
Channel Displays the channel the Adapter is set to for wireless network communication.
Security Mode Displays the Security Mode currently being used or will appear as disabled if wireless security is not being used on the network.
Basic > Network Settings
Basic > Network Settings
LAN Settings
IP Address Mode This option determines if the Adapter’s IP address is set manually (Static) or obtained automatically from a DHCP server. The default is Static.
IP Address When IP Address Mode is set to static, the Adapter’s IP address, as seen from the LAN (Local Area Network) can be defined in this field. This address must be unique and is used to access the
Subnet Mask The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.
Default Gateway This is the IP address of the default gateway for your LAN.