Wireless Network Settings, Wireless Security Mode

Chapter 4

Advanced Configuration

Returning to Standard Operating Mode

When your LAN Party is over and you want to reconfigure the Gaming Adapters, be sure to note that the procedure is different for the Gaming Adapter designated as the master and the other adapters.

Setting the Master Adapter Back to Wireless Bridge Mode

To return the Gaming Adapter designated as the master back to Wireless Bridge Mode, access the web-based utility of the master unit, and switch to Wireless Bridge mode. To do this, perform the following steps:

1.ConnectacomputertotheGamingAdapterdesignated as the master.

2.Launch your web browser.

3.Enter the IP address of the master Adapter. The IP address for the master adapter is 192.168.1.251.

NOTE: The Gaming Adapter IP address changes from 192.168.1.250 to 192.168.1.251 when LAN Party Gaming is enabled in the web‑based utility. This only applies to the adapter designated as the master.

4.Login to the Gaming Adapter. The default user name and password is admin.

5.Go to the Basic > Wireless screen.

6.Change the Wireless Network Mode option to Wireless Bridge.

7.Click the Save Settings button.

Removing Non-Master Adapters from LAN Party Gaming Mode

To change a Gaming Adapter (non-master) back to standard operating mode, you must press the Reset button for approximately five seconds, using a pin or straightened paper clip.

Reset Button

Upon release of the Reset button the Gaming Adapter will restart and return to standard operating mode.

Wireless Network Settings

Wireless Network Name This is the wireless network name (SSID) defined on the access point that the Adapter will associate with. Leave this field blank to associate to any access point.

802.11 Band

•2.4GHz This option can be selected if you only want to use the 2.4GHz spectrum of radio frequencies on your wireless network. 802.11b, 802.11g, and 802.11n support this spectrum.

•5GHz This option can be selected if you only want to use the 5GHz spectrum of radio frequencies for your wireless network. 802.11a and 802.11n support this spectrum.

•2.4GHz and 5GHz This option can be selected if you want to use both frequencies on your wireless network.

802.11Mode The mode options available will vary based on the band mode(s) supported.

Transmission Rate By default, the fastest possible transmission rate is selected. The speed can be selected manually.

Channel Width This option is available in Mixed modes that utilize 802.11n. The default Auto 20/40 MHz setting is typically the best. Manual selection is possible if necessary.

Wireless Security Mode

Security Mode Below is an overview of the available security modes:

•None When this option is selected, encryption is not used on your wireless network.

•WEP Thisisanearliergenerationofwirelessencryption technology. WEP is not as secure as WPA.

•WPA-Personal This option uses WPA (Wi-Fi Protected Access) with a pre-shared key. There are two versions of the standard available. WPA2 is the newer and stronger version of encryption.

Dual-Band Wireless-N Gaming Adapter

WGA600N specifications

The Linksys WGA600N is a powerful wireless gaming adapter designed to enhance the online gaming experience by providing a fast and stable internet connection. This device serves as a bridge between wired gaming consoles, like the PlayStation 3 or Xbox 360, and wireless networks, allowing gamers to enjoy high-speed internet without the need for long cables.

One of the main features of the WGA600N is its support for Wireless-N technology. This advanced standard allows for significantly faster data transfer rates compared to previous generations, such as Wireless-G. With speeds up to 300 Mbps, gamers can experience reduced lag and improved online gameplay, making it an ideal choice for those who demand seamless connectivity during intense gaming sessions.

The WGA600N utilizes dual-band technology, which enables it to operate on both the 2.4 GHz and 5 GHz frequency bands. This flexibility helps to minimize interference from other wireless devices, thereby providing a more reliable connection. The 5 GHz band is particularly advantageous for gamers, as it is less congested and can offer higher performance in terms of speed and stability.

Another noteworthy characteristic of the WGA600N is its user-friendly setup. With a simple plug-and-play design, users can easily connect their gaming consoles to the device without requiring extensive technical knowledge. The integrated web-based setup interface simplifies the configuration process, allowing users to manage their network settings effortlessly.

The WGA600N also supports advanced security features, including WPA2 encryption, which helps protect your gaming sessions from unauthorized access. This is particularly important for gamers who are concerned about their online privacy and security while playing in multiplayer environments.

Furthermore, the gaming adapter is equipped with four Ethernet ports, enabling users to connect multiple consoles or other wired devices directly to the unit. This versatility means that families with multiple gaming setups can benefit from a single device, centralizing their internet connection for all consoles.

In summary, the Linksys WGA600N is an exceptional gaming adapter that incorporates cutting-edge technologies such as Wireless-N, dual-band capabilities, and robust security features. Its ease of use and ability to support multiple devices make it an ideal choice for dedicated gamers looking to enhance their online experience.