
Calibration Hole
•Turn Pixter® Color power on. Wait until you see the Home Screen.
•Turn Pixter over and locate the calibration hole.
•Insert, push and hold the stylus in the calibration hole. Turn Pixter® Color over so that you can see the screen.
•When you see two ![]()
![]()
![]()
![]()
![]()
, remove the stylus from the calibration hole.
•First touch the ![]()
![]()
![]()
![]()
![]()
in the upper left corner with the tip of the stylus.
•Then, touch the ![]()
![]()
![]()
![]()
![]()
in the lower right corner with the tip of the stylus.
Hint: After calibrating your screen, the contrast resets to the
To change the contrast on the screen, touch the Save It!
tool.
60