Sharp R-2397 service manual Procedure for Entering to IC-2

R-2397

PROCEDURE FOR CHECKING/CLEARING SERVICE COUNTS OF MICROWAVE OVEN

The following procedure enables the servicer to obtain the total service counts (cook cycles) for memory cooking, double quantity cooking and defrost. The maximum capacity of the counter is 999,999 counts, above which the counter will reset to "0". The counter will retain the total counts (will not clear) in the event of a power disruption.

1)Practice for checking total service counts (eg; 234,567 Counts).

• • • flashing • • • 0.1sec BUZZER

		PAD		DISPLAY			INDICATOR		LED	PHONE
(Door close)					•
					•
	CHECK			NUMBER	•			CHECK
	CHECK		#1		82 68			CHECK
				( user total count )
#2
		VOLUME
		VOLUME
		DOUBLE			2 34 56 7
		QUANTITY		( service total count )
1				NUMBER	1
				( after 1 sec. )
					45
				( filter used time )
2				NUMBER	2
				( after 1 sec. )
					2 00
				( filter lim. time )
		0 (No 10)		NUMBER	10
				( after 1 sec. )
					35 43	2
				( service total cook time )
	CHECK				•

#1: Denotes total service counts within the reach of user, of which checking and clearing practices are described in

this instruction manual.

#2: Denotes the procedure for the servicer to disable check- ing/clearing. This procedure is instructed to service per- sonnel only and is excluded from the operation manual.

2)Practice for clearing Service's counts

"" : Flicker / : 0.1 sec BUZZER

PAD ORDER		DISPLAY			PHONE
(Door close)		.
CHECK	"NUMBER"	.		CHECK
CHECK		82 68		"CHECK"
	(User's Total Counts)
#1 VOLUME		82 68		"CHECK"
VOLUME		82 68		"CHECK"
DOUBLE		2 34 56	7	"CHECK"
QUANTITY	(Total Counts of Service)
SET			0	"CHECK"
0			0	"CHECK"
SET			0	"CHECK"
CHECK		.

#1: Denotes the procedure for the servicer to disable clear- ing. This procedure is instructed to service personnel only and is excluded from the operation manual.

PROCEDURE FOR ENTERING TO IC-2

When the control unit or IC-2 is exchanged, re-enter the constants of DEFROST and the memory pads 1~20, refer- ring to items 1 and 2 below.

1)How to enter the contents of DEFROST T = STG1 + STG2 + STG3

STG = A x T + B

1stage 10% power level

"" : Flicker / : 0.1 sec BUZZER

PAD ORDER		DISPLAY		PHONE
(Door close)		.
SET		.
SET	"NUMBER" .
(within 2 sec.)
#1 START	"NUMBER" .
DEFROST	1	0.00 DEF
9,9	1	0.99 DEF		x 2
		(A)
SELECTATIME	1	0 DEF
9	1	90 DEF
	#2	(+ - B)
		DEF	"POWER"
SELECTAPOWER	1	90	100%
		DEF	"POWER"
1		90	10%
SELECTATIME	2	0.00 DEF
0	2	0.00 DEF
		(A)
SELECTATIME	2	0 DEF
0	2	0 DEF
		(+ - B)
SELECTATIME	3	0 DEF
START	3	A DEF
SET	4	. DEF
SET		.

#1 : No key entry signal.

#2 : To set-B, touch the selectapower key twice.

2) How to enter the memory information

Example : Suppose cooking time 5 sec. and output power 100% are entered into the memory pad 1.

PAD ORDER		DISPLAY	PHONE
(Door close)		.
SET		.
SET	"NUMBER"	.
(within 2 sec.)
1	NUMBER 1	. 0
5	NUMBER 1	. 5
SET	"NUMBER"	.
SET		.

Enter the memory information into the memory pads 1 ~10 referring to above example. The memory information are given below.

22