4 System Setup
Connecting the Power Supply
1Connect the base power supply into the power jack on the charger base.
2Connect the power supply to the outlet. The power indicator light will be solid green.
Docking and Charging the Headset
1Gently push the headset into the charging cradle.
The charging indicator light on the headset will flash white to indicate that the headset battery is charging and will turn solid white when fully charged.
2Charge for at least 20 minutes prior to first use. A full charge takes 3 hours.
Charging time
20 min ..................... 
Minimum charge before first use
3 hours ....................
Full charge
Charging Indicator Light
Power Indicator Light
NOTE The USB charging cable can also be used to charge the headset.
To successfully charge your headset with the USB cable the PC must be on and in an active state (not standby). The charging time will vary according to the number of other devices drawing power from the PC’s USB port(s).
Connecting the USB Adapter to your PC
1Insert the USB adapter into USB Port on PC. The indicator light on the USB adapter will be solid red to indicate the USB adapter is powered on and will turn solid green when it finds the headset.
NOTE The headset may have to be charged before the USB adapter can find it.
2The USB adapter can be folded as shown.
Important NOTE For best performance it is recommended that Windows is updated with Service Pack levels listed below:
Microsoft Windows® XP Service Pack 3 (SP3) or later
Microsoft Windows Vista® Service Pack 1 (SP1) or later
Plantronics Savi User Guide | 8 |