Bosch Appliances D9412GV4 Power Outputs Total Available Power, 32, Programming

Page 24

24 en Power Supply and Power Outputs

Control Panel

 

 

–Terminal 8: Output C (Switched Auxiliary Power) PTC CB5 protects Terminal 24: Zonex Power.

PTC CB1 protects Terminal 32: SDI Power +.

PTC CB3 protects Terminal 36: SDI2 Power +.

Required by UL:

–All devices powered from a power output are to be supervised.

–Power outputs are not shared between fire and non-fire devices unless all devices are in conduit within 20 ft, and in the same room.

4.4

Power Outputs - Total Available Power

The system produces up to 1.4 A of combined power at 12.0 VDC Nominal for all powered devices. The outputs listed below share the available power. These outputs are shown as red circles on the faceplate.

–Terminal 3 - Auxiliary Power. Use this terminal to power devices requiring continuous power.

–Terminal 6 (Output A) - Alarm Power Output. Programmable relay normally open, power on alarm.

–Terminal 7 (Output B) - Alternate Alarm Power Output. Programmable relay normally open, power on alarm.

–Terminal 8 (Output C) - Switched Auxiliary Power. Programmable relay normally closed, switches power off when the Sensor Reset command is executed.

–Terminal 24 - Zonex Power. Use this terminal to power Zonex modules such as the D8125, D8128D, and D8129 Modules.

–Terminal 32 - SDI Power +. Use this terminal to power serial device interface (SDI) devices such as keypads, the D9210C Wiegand Control Interface Module, the ICP- SDI-9114 module, and other compatible SDI devices.

–Terminal 36 - SDI2 Power +. Use this terminal to power serial device interface 2 (SDI2) devices such as B208, B308, B426, B810, B920, B930, and other compatible SDI2 devices.

4.5

Power Outputs - Continuous Power Output Terminals 3, 8, 24,

 

32, and 36

 

The continuous current draw for powered devices connected to Terminals 3, 8, 24, 32, and 36,

 

and the accessory connector must not exceed 1.4 A. Devices powered from these outputs

 

must operate at 12.0 VDC Nominal.

 

Power Restricted for Fire and Combined Fire and Burglary Systems

 

Use the Fire System Power Formula to calculate the current available for fire and combined

 

fire and burglary systems (refer to Power Outputs - Programmable Power Output Terminals 6, 7,

 

and 8, page 24).

4.6

Power Outputs - Programmable Power Output Terminals 6, 7,

 

and 8

4.6.1

Programming

 

The power outputs at Terminals 6, 7, and 8 are programmed as Outputs A, B, and C. All

outputs are programmed in the Outputs section. Outputs are assigned a output type, (Fire Bell, for example) when they are assigned to an area. Outputs can be assigned to one or more areas. The Bosch defaults set Output A (Terminal 6) as a Steady Alarm Bell output, Output B (Terminal 7) as a Pulsed Fire Bell output, and Output C (Terminal 8) as a Verification or Reset output for smoke detectors. The D9412GV4/D7412GV4 v2.00 Program Entry Guide (P/N:

2012.12 02 F.01U.265.462

UL Installation Instructions

Bosch Security Systens, Inc.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Control Panel Page Table of contents Introduction About documentationDates Installation Installation PreparationEnclosure Options Mounting EnclosureInstalling the Control Panel Callout DescriptionConnecting Earth Ground Ground Fault Detect EnableEnabling Ground Fault Detection TerminalGround Fault Impedance Specifications 5Locking the Reset PinImpedance Control Panel Detects Ground Fault Reset pin locked closed Reset pin normal open Reset Pin3Diagrams 1FaceplatesPower Supply Side Wiring Diagrams PhoneSystem Wiring Diagram VDC regulated, power-limited power supplyD9412GV4/D7412GV4 Input Points and Peripheral Devices For D129, use zero retard except for waterflow devices SDI Devices Wiring Diagrams D9412GV4 SDI and Zonex Devices System Wiring DiagramCallout ￚ Description D7412GV4 SDI and Zonex Devices System Wiring Diagram D7412GV4 SDI and Zonex Devices System Wiring DiagramD9412GV4/D7412GV4 SDI2 Devices System Wiring Terminals 24 through 36 are power limited, supervisedStructions P/N F01U030068 D9412GV4/D7412GV4 Capacities ModuleModule D9412GV4 D7412GV4 1SDI2 Bus Wiring Recommendations Following rules must be followed when wiring the SDI2 busMaximum cable lengths Keyswitch Wiring Capacitance ratings of the wire being usedCable Overall Capacitance Length Use Non-shielded cable onlyPower Supply and Power Outputs Power Supply PrimaryPrimary AC Power Circuit Installing the TransformerPower Terminals Secondary Secondary DC PowerInstalling the Battery Battery terminals. Terminal 5 is non-power limiting Battery TerminalsPower Outputs Circuit Protection Non-PowerLimited WiringPower Outputs Total Available Power Power Outputs Continuous Power Output Terminals 3, 8Power Outputs Programmable Power Output Terminals 6 32,Fire System Power Formula Available PowerTerminals 6 Voltage Output at Terminals 6, 7,Verification/Reset Output 4TerminalSpecifications Battery SDI2 BusTelephone ConnectionsB520 Specifications Terminal Wiring Requirements Terminal Requirements DescriptionCommon Zonex Power BUS a SDI PowerPoint 5/6 Point 7/8SDI2 Power CompatibilitiesModel Title Intrusion CUL 985 IST-EZTS 3RFBT-A3RFDW-RM-A 3RFDW-SM-A4Circuit Classes Onboard PointsZonex Bus or Buses Notification Appliance Circuit NACPage Bosch Security Systems, Inc
Related manuals
Manual 32 pages 42.2 Kb

D9412GV4 specifications

Bosch Appliances has long been synonymous with quality and innovation in the home appliance market. The D7212GV4, D7412GV4, and D9412GV4 models are part of their esteemed line of high-performance appliances, designed to meet the demands of modern kitchens and households. These models come equipped with advanced features and technologies to enhance user experience, efficiency, and convenience.

The D7212GV4 is characterized by its compact design, making it ideal for smaller kitchens or spaces where every inch counts. Despite its size, it boasts impressive functionality, including multiple cooking modes that allow users to prepare a variety of dishes with ease. Its intuitive interface ensures that even novice cooks can operate it effortlessly.

In contrast, the D7412GV4 offers a balance of capacity and features. It includes a larger cooking area, which is perfect for families or for those who frequently entertain guests. This model is highlighted by its state-of-the-art steam cooking technology, which helps retain nutrients in food while ensuring moist and tender results. Additionally, the D7412GV4 has a built-in self-cleaning feature, making maintenance and upkeep considerably easier for busy homeowners.

Meanwhile, the D9412GV4 showcases Bosch’s commitment to premium quality and performance. This high-end model is designed for the serious home chef, combining powerful heating elements with advanced temperature control for professional-grade results. One of the standout features of the D9412GV4 is its induction cooking technology, which offers rapid heating and precise temperature adjustments, making cooking faster and more efficient. This model is also equipped with smart connectivity, allowing users to control and monitor their cooking process remotely via a dedicated app.

All three models in this series emphasize energy efficiency, with Bosch appliances consistently meeting or exceeding Energy Star standards. They include sleek designs that integrate seamlessly into any kitchen décor, whether contemporary or traditional. Additional features such as safety locks, child-proof settings, and easy-to-clean surfaces enhance their appeal, making them a practical choice for families.

In summary, the Bosch D7212GV4, D7412GV4, and D9412GV4 appliances capture the essence of modern cooking with their blend of compact design, advanced technologies, and user-friendly features. These models represent Bosch's dedication to innovation, performance, and sustainability, making them a wise investment for any home.
Top Page Image Contents