Lenovo IdeaPad 100S manual Upper case, Removal steps of upper case

Page 49

Lenovo ideapad 100S-14IBR

1090 Upper case

For access, remove these FRUs in order:

“1010 Base cover” on page 32

“1020 Battery pack” on page 35

“1030 Solid state disk (on select models)” on page 37

“1040 PCI Express Mini Card for wireless LAN” on page 38

“1080 System board” on page 43

Figure 9. Removal steps of upper case

Peel off the adhesive tape that secures the antenna assembly 1.

1

Remove the screws 2.

2

2

 

 

2

2

2 2

Step

Screw (quantity)

Color

Torque

 

 

 

 

2

M2.5 × 5.0 mm, Phillips-head, nylok-coated (6)

Black

3.0 kgf/cm

 

HINGE-C COVER

 

 

 

45

Image 49
Contents Ideapad 100S-14IBR Hardware Maintenance Manual First Edition Sep Copyright Lenovo 2015. All rights reserved Contents About this manual Safety information General safety Electrical safety Lenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notice Safety notices multilingual translationsLenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety information Lenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety information Lenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety information Laser compliance statement Safety information Strategy for replacing FRUs Important service informationImportant notice for replacing a system board Strategy for replacing a hard disk driveImportant information about replacing RoHS compliant FRUs General checkout What to do first Following are not covered under warrantyChecking the AC adapter Power system checkoutChecking operational charging Checking the battery packRestoring the factory contents by using Recovery system Related service informationPower-on password PasswordsHard-disk password Administrator passwordScreen blank state Power managementPutting the computer to sleep or shutting it down Putting your computer to sleepLenovo ideapad 100S-14IBR SpecificationsLenovo ideapad 100S-14IBR Status indicators Status indicatorsFn key combinations Fn key combinations/HotkeysScrew notices FRU replacement noticesRemoving and replacing an FRU Remove the screws 1 and 2 from the bottom Base coverRemove the base cover in the directions shown by arrows 4 Win 10 OS label Brazil label Rating label For access, remove this FRU Base cover on Battery packRemove the battery pack Remove the screw Solid state disk on select modelsRemoval steps of PCI Express Mini Card for wireless LAN PCI Express Mini Card for wireless LANWhen installing Removal steps of IO board IO boardRemoval steps of touchpad button board Touchpad button boardRemoval steps of speakers SpeakersImportant notices for handling the system board System boardRemove the system board in the direction shown by arrows Removal steps of upper case Upper caseLenovo ideapad 100S-14IBR Hardware Maintenance Manual Remove LCD bezel screw pads 1 and the screws LCD unitPANEL-A Cover Removal steps of LCD hinges LCD hingesHinge BKT-A Cover Removal steps of EDP cable and integrated camera EDP cable and integrated cameraRemove the EDP cable in the direction shown by arrows Front and right-side view LocationsBottom and left-side view Parts list Overall Parts list-Overall FRU LCD FRUs Parts list-LCD FRUs Screws AC adaptersLenovo ideapad 100S-14IBR Hardware Maintenance Manual Trademarks Mans.io