Lenovo IdeaPad 100S manual General safety

Page 6

Lenovo ideapad 100S-14IBR Hardware Maintenance Manual

General safety

Follow these rules below to ensure general safety:

Observe a good housekeeping in the area where the machines are put during and after the maintenance.

When lifting any heavy object:

1.Make sure that you can stand safely without slipping.

2.Distribute the weight of the object equally between your feet.

3.Use a slow lifting force. Never move suddenly or twist when you attempt to lift it.

4.Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.

Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

Before you start the machine, make sure that other service representatives and the customer are not in a hazardous position.

Please remove covers and other parts in a safe place, away from all personnel, while you are servicing the machine.

Keep your toolcase away from walk areas so that other people will not trip over it.

Do not wear loose clothing that can be trapped in the moving parts of the machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with the nonconductive clip, about 8 centimeters (3 inches) from the end.

Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing.

Attention: Metal objects are good electrical conductors.

Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that may be hazardous to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.

Reinstall all covers correctly before returning the machine to the customer.

Fan louvers on the machine help to prevent the overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers.

2

Image 6
Contents Ideapad 100S-14IBR Hardware Maintenance Manual First Edition Sep Copyright Lenovo 2015. All rights reserved Contents About this manual Safety information General safety Electrical safety Lenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notices multilingual translations Safety noticeLenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety information Lenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety information Lenovo ideapad 100S-14IBR Hardware Maintenance Manual Safety information Laser compliance statement Safety information Important service information Strategy for replacing FRUsStrategy for replacing a hard disk drive Important notice for replacing a system boardImportant information about replacing RoHS compliant FRUs General checkout Following are not covered under warranty What to do firstPower system checkout Checking the AC adapterChecking the battery pack Checking operational chargingRelated service information Restoring the factory contents by using Recovery systemHard-disk password PasswordsPower-on password Administrator passwordPutting the computer to sleep or shutting it down Power managementScreen blank state Putting your computer to sleepSpecifications Lenovo ideapad 100S-14IBRLenovo ideapad 100S-14IBR Status indicators Status indicatorsFn key combinations/Hotkeys Fn key combinationsFRU replacement notices Screw noticesRemoving and replacing an FRU Base cover Remove the screws 1 and 2 from the bottomRemove the base cover in the directions shown by arrows 4 Win 10 OS label Brazil label Rating label Battery pack For access, remove this FRU Base cover onRemove the battery pack Solid state disk on select models Remove the screwPCI Express Mini Card for wireless LAN Removal steps of PCI Express Mini Card for wireless LANWhen installing IO board Removal steps of IO boardTouchpad button board Removal steps of touchpad button boardSpeakers Removal steps of speakersSystem board Important notices for handling the system boardRemove the system board in the direction shown by arrows Upper case Removal steps of upper caseLenovo ideapad 100S-14IBR Hardware Maintenance Manual LCD unit Remove LCD bezel screw pads 1 and the screwsPANEL-A Cover LCD hinges Removal steps of LCD hingesHinge BKT-A Cover EDP cable and integrated camera Removal steps of EDP cable and integrated cameraRemove the EDP cable in the direction shown by arrows Locations Front and right-side viewBottom and left-side view Parts list Overall Parts list-Overall FRU LCD FRUs Parts list-LCD FRUs AC adapters ScrewsLenovo ideapad 100S-14IBR Hardware Maintenance Manual Trademarks Mans.io