During cooking
•If 
is displayed (+ sound alarm) - fig. 10 carefully remove the baskets and juice collector using oven gloves, add water up to the maximum level. The steamer will automatically continue the cooking process.
EN
Do not touch hot surfaces or hot food during cooking. Use oven gloves.
If the water tank is empty, the steamer stops heating.
The delayed start time can be changed at any point.
Delayed start
•Set the cooking time using the + and – touchpads (max. 60) - fig. 7.
•Press the Prog touchpad - fig. 14. The programming symbol 
is displayed and the clock
flashes.
•Select the time at which cooking is to finish - fig. 7 (going up in 15 min, then hourly steps).
•5 sec. later the delayed start is operational and the clock
disappears. A beep then sounds for a few seconds indicating cooking has been set.
•At the end of the delay period, the steamer automatically switches to cooking mode.
Keep warm function
While the keep warm function is in operation, no other action is possible, except stop when required.
•A beep sounds twice at the end of the cooking time.
•The keep warm function starts automatically at the end of the cooking process, and the keep warm symbol 
is displayed - fig. 11.
•The keep warm time elapsed (since the end of cooking) is displayed.
Removing the food
• | Remove the lid by the handle. | Use oven gloves when handling |
• | Remove the cooking trays and steaming baskets using the | the baskets, handles and lid. |
| handles - fig. 12 and 13. |
|
• | Serve the food. |
|
If you want to switch off the steamer when the « low water level » indicator is on, you must press twice on the on/off touchpad.
To stop the steamer
•One press on the on :off touchpad stops the keep warm function - fig. 15.
•A second press puts the steamer on standby 
.
•After 1 hour in keep warm mode, the steamer switches to standby mode. The light goes out 
.
•Unplug the steamer.
5