Before the first use, Using your rice cooker

5083518-RICE COOKER 4 IN 1 GB-RC 21/03/07 11:30 PAGE 3

Description

1.Steam basket

2.Graduation for water and rice

3.Removable nonstick bowl

4.Measuring cup

5.Removable steam shield

6.Fixing axis of the steam shield

7.Spoon

8.Spoon support

9.Hotplate

10.Sensor

11.Lid opening button

12.Steam vent

13.Lid Handle

14.Lid

15.Condensation collector

16.Control box

a.Display of cooking time or of delayed start-up, in rice-cooker mode

b.Rice cooking indicator light (red)

c.Slow cooking indicator light (red)

d.Minus button of timer

e.Steam cooking indicator light (red)

f.Porridge indicator light (red)

g.Plus button of timer

h.Keep warm indicator light (orange)

17.Power cord

18.Power cord storage

Before the first use

Unpack the appliance

•Remove the appliance from the packaging and unpack all the accessories.

•Open the lid by pressing the opening button located on the handle – Fig. 1.

•Remove all the printed documents and the accessories.

•Install the spoon support: insert the plastic hook of the support in the hole located under the hinge of the lid, and slide it downwards – Fig. 2.

Read the instructions and carefully follow the operating method.

Clean the appliance

•Remove the non-stick bowl.

•Clean the metal parts of the lid and the bowl with a sponge and washing-up liquid. Fit the steam shield onto its fixing axis – Fig. 3. Wipe the outside of the appliance with a damp cloth.

•Dry off carefully.

Using your rice cooker

For all 4 functions

•Carefully wipe the outside of the bowl (especially the bottom). Make sure that there are no foreign residues underneath the bowl and on the hotplate

– Fig. 4.

•Place the bowl into the appliance – Fig. 5, making sure that it is correctly positioned.

•Slightly rotate the bowl in both directions, so as to ensure good contact between the bottom of the bowl and the hotplate.

•Make sure that the steam shield is correctly in position – Fig. 3.

•Close and lock the lid.

•Check that the condensation collector is correctly in position – Fig. 6.

•Plug in the appliance.

•Do not switch on the appliance until all of the above stages have been completed.

Never place your hand on the steam vent during cooking, as there is a danger of burns. If the bowl is not properly in place in the appliance, cooking will not start.

If you wish to change the selected cooking time in the event of an error, press cancel. Select the cooking mode again and then the cooking time.

Press Start to begin the cooking process.