5Removal and replacement procedures
Tablet component replacement procedures
CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 15 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.
Back cover
Description | Spare part number |
|
|
Back cover |
|
|
|
Display panel assembly, | |
cable, and bottom speaker/vibrator module assembly cable) |
|
|
|
Before disassembling the tablet, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
Remove the back cover:
1.Place the tablet on a flat surface, display panel side down, with the release notch toward you.
CAUTION: Before positioning the tablet with the display panel facing down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly.
2.Use the release notch (1) to release the back cover (2) from the display panel assembly.
Tablet component replacement procedures | 13 |