System board
Description | Spare part number |
|
|
System board equipped with a Marvel PXA1088 | |
system memory, and a |
|
|
|
Before removing the system board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 13).
5.Remove the battery (see Battery on page 14).
6.Remove the middle frame (see Middle frame on page 15).
Remove the system board:
1.Disconnect the following cables from the system board:
(1)Antenna board RF cable
(2)Light sensor board
(3)TouchScreen cable
(4)Display panel cable
(5)Vibrator module cable
System board | 21 |