1.Release the ZIF connector (1) to which the display panel cable cable is attached, and then disconnect the display panel cable from the display panel assembly.
2.Release the ZIF connector (2) to which the display panel cable is attached, and then disconnect the display panel cable from the system board.
3.Remove the display panel cable (3).
Reverse this procedure to install the display panel cable.
Power connector cable
Description | Spare part number |
|
|
Power connector cable | |
|
|
Before removing the power connector cable, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 19).
Remove the power connector cable:
Power connector cable 29