1.Release the ZIF connector (1) to which the
2.Remove the Phillips PM2.0×4.1 screw (2) that secures the
3.Remove the
Reverse this procedure to install the
Transfer board
Description | Spare part number |
|
|
Transfer (includes cable and | |
|
|
Before removing the transfer board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 19).
Remove the transfer board:
Transfer board 31