System board
NOTE: The system board spare part kit includes replacement thermal material.
Description | Spare part number |
|
|
For use only with computer models equipped with | |
|
|
For use only with W8 Standard computer models equipped with | |
|
|
For use only with W8 Pro computer models equipped with | |
|
|
System board for keyboard dock | |
|
|
System board for use only with | |
(includes processor and replacement thermal material) |
|
|
|
System board for use only with | |
processor (includes processor and replacement thermal material) |
|
|
|
System board for use only with | |
processor (includes processor and replacement thermal material) |
|
|
|
Before removing the system board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the base enclosure (see Base enclosure on page 28).
5.Remove the battery (see Battery on page 29).
Remove the system board:
1.Remove the following cables:
●Power connector/USB/Audio board cable (1)
●Digital card media reader cable (2)
●Hinge assembly left cable(3)
●TouchPad cable (4)
●Keyboard cable (5)
●Multimedia board cable (6)
Component replacement procedures 37