Reverse this procedure to install the
Speakers
Description | Spare part number |
|
|
Speaker Kit (includes left and right speakers and cables) | |
|
|
Before removing the speakers, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 11).
5.Disconnect the battery cable from the system board (see Battery on page 13).
Remove the speakers:
1.Unsolder the speaker cables (1) from the system board speaker connectors.
NOTE: When installing the speakers, the red speaker cables should be soldered to the system
board “positive” terminals. The black speaker cables should be soldered to the system board “negative” terminals.
2.Release the speaker cables (2) from the clips built into the display panel assembly.
18 | Chapter 5 Removal and replacement procedures |