Remove the system board:
1.Disconnect the following cables from the system board:
(1)TouchScreen ZIF connector and cable
(2)Controller ZIF connector and cable
(3)Speaker cables (must be unsoldered, see Speakers on page 18)
(4)Power/button board ZIF connector and cable
(5)
(6)Antenna cable (must be unsoldered, see Antenna on page 21)
(7)
(8)Microphone cable (must be unsoldered, see Microphone on page 19)
2.Remove the three Phillips PM1.5×2.5 screws (1) that secure the system board to the display panel assembly.
3.Detach the left side of the system board (2) from the display panel assembly. (The left side of the system board is attached to the display panel assembly with
System board | 23 |