HP x2100 manual Removing the Fire GL2 Drivers, Click Remove the product

REMOVING THE FIRE GL2 DRIVERS

This section describes how to properly remove your graphics card software from your system should you need to do so.

Before removing the Fire GL2 video driver, please close all open application programs and disable any anti-virus software that is running on your computer until the driver is removed!

To install or uninstall the Fire GL2 drivers, you need administrator rights or you must be logged on as a user with administrator rights under Windows NT and Windows 2000.

1.From the Start menu, click Start > Programs > Diamond, then click DIAMOND Install/Uninstall. The Diamond Install dialog appears. Click Next.

2.Click Remove the product.

Note: Make sure that only those components are selected that you want to remove now. (Click Back and Add/Remove components to select specific software components for removal.)

Then click Next.

3.Click Next to remove the software and shut down your computer.

After you have removed the software according to the instructions, you may remove the hardware.

1.Shut down your computer.

2.Remove the computer case as outlined in the hardware installation instructions.

3.Ground yourself by touching the power supply box.

4.To remove the hardware, simply reverse the hardware installation procedures.

Removing the Fire GL2 Drivers 35