HP 34811A manual To Change the HP BenchLink/Arb Icon

R

Chapter 1 Installation

To Change the HP BenchLink/Arb Icon

∙Pywy uwy yy uy D4

∙ W ef38982 vy wwy4

Wyuwy wuvy u xywyx xyu Vc 99786N User’s Guide.

∙Check the error messages contained in Chapter 6.

∙If your PC is configured to use extended memory management (such as EMM386.EXE) and you are using a Hewlett-Packard HP-IB Interface card, you must ensure that the memory management does not conflict with the interface card. The installation section of your HP-IB interface card user’s manual describes configurations to avoid this problem.

∙If you are using an IEEE-488 Interface card, ensure you have correctly installed the interface software before running

HP BenchLink/Arb. Either an HPIB.DLL or GPIB.DLL file must be located in your HP BenchLink/Arb directory, the Windows directory, or a directory included in the PATH command in your AUTOEXEC.BAT file. For specific details, refer to your IEEE-488 Interface card installation guide.

g

You can change the HP BenchLink/Arb icon appearance in the BenchLink program group.

RClick the HP BenchLink/Arb icon in the BenchLink program group to select it (do not start the application).

SSelect FILE PROPERTIES... in the Windows program manager menu bar. The Program Item Properties dialog box is displayed.

10