HP multimedia manual Using an optical drive

Page 13

Removing an optical disc when running on battery or external power

1.Press the release button (1) on the drive bezel to release the media tray, and then gently pull out the tray (2) until it stops.

2.Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.

NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.

3.Close the media tray and place the disc in a protective case.

ENWW

Using an optical drive 7

Image 13
Contents Multimedia First Edition June Document Part Number Product notice Iv Product notice Table of contents Enww Using the audio features Using multimedia hardwareUsing the audio-out headphone jack Using the audio-in microphone jackAdjusting the volume Using the external monitor port Using the video featuresUsing the Hdmi port Identifying the installed optical drive Using an optical driveInserting an optical disc Using an optical drive Removing an optical disc when no computer power is available Working with multimedia software Installing multimedia software from a disc Opening preinstalled multimedia softwareUsing multimedia software Preventing playback disruptions Observing the copyright warning Changing DVD region settingsDVD IndexEnww