HP multimedia manual Using an optical drive, Identifying the installed optical drive

Page 12

Using an optical drive

Depending on the type of optical drive and software installed in your computer, the optical drive plays, copies, and creates CDs or DVDs.

Identifying the installed optical drive

Select Start > My Computer.

The type of optical drive installed in the computer is displayed under Devices with Removable Storage.

Inserting an optical disc

1.Turn on the computer.

2.Press the release button (1) on the drive bezel to release the media tray.

3.Pull out the tray (2).

4.Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up over the tray spindle.

NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.

5.Gently press the disc (3) down onto the tray spindle until the disc snaps into place.

6.Close the media tray.

NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an AutoPlay dialog box opens. It prompts you to select how you want to use the media content.

6 Chapter 1 Using multimedia hardware

ENWW

Image 12
Contents Multimedia First Edition June Document Part Number Product notice Iv Product notice Table of contents Enww Using multimedia hardware Using the audio featuresUsing the audio-in microphone jack Using the audio-out headphone jackAdjusting the volume Using the video features Using the external monitor portUsing the Hdmi port Using an optical drive Identifying the installed optical driveInserting an optical disc Using an optical drive Removing an optical disc when no computer power is available Working with multimedia software Opening preinstalled multimedia software Installing multimedia software from a discUsing multimedia software Preventing playback disruptions Changing DVD region settings Observing the copyright warningIndex DVDEnww