HP t5630w manual Specifications, Table A-1HP t5145/t5540/t5545/t5630 Thin Client

Page 25

A Specifications

Table A-1HP t5145/t5540/t5545/t5630 Thin Client

Dimensions

 

 

Width

52.07 mm

2.05 in.

Height (without stand)

209.55 mm

8.25 in

Height (with stand)

219.70 mm

8.65 In

Depth

215.90 mm

8.50 in.

 

 

 

Approximate Weight

1.54 kg

3.40 lb

 

 

 

Temperature Range (fanless design)*

 

 

Operating**

10° to 40° C

50° to 104° F

(max. rate of change is 10° C per hour or 18° F per hour)

 

 

Nonoperating

-30° to 60° C

-22° to 140° F

(max. rate of change is 20° C per hour or 36° F per hour)

 

 

 

 

*Specifications are at sea level with altitude derating of 1° C/

** The operating temperature range when the thin client

300m (1.8° F/1000ft) to a maximum of 3Km (10,000ft), with

is attached to a flat panel using the HP Quick Release

no direct, sustained sunlight. Upper limit may be limited by

is 50° to 95° F (10° to 35° C).

the type and number of options installed.

 

 

 

 

 

Relative Humidity (non-condensing)

 

 

Operating

10–90%

10–90%

(max. wet bulb temperature is 28° C or 84.2° F)

 

 

Nonoperating

5–95%

5–95%

(max. wet bulb temperature is 38.7° C or 101.6° F)

 

 

 

 

 

Maximum Altitude (unpressurized)

 

 

Operating

3048 m

10,000 ft

(max. allowed rate of change is 457m per minute or 1500 ft

 

 

per minute)

 

 

Nonoperating

9144 m

30,000 ft

 

(max. allowed rate of change is 457m per minute or 1500 ft

 

 

per minute)

 

 

 

 

 

Power Supply

 

 

Operating Voltage Range

100–240 VAC

100–240 VAC

 

 

 

19

Image 25
Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix C Mounting the Thin Client Standard Features Product FeaturesThin Client Management Solutions 1Front panel components Front Panel Components2Top components, external view Top ComponentsRear Panel Components Installing the Rubber Feet6Installing the stand Product Features Installing the Stand7Removing the stand Removing the Stand Removing the StandCtrl key Using the KeyboardWindows Logo Key Special Mouse FunctionsAdditional Function Keys Serial Number Location 9Serial number location Product FeaturesHardware Changes General Hardware Installation SequenceRemoving the Secure USB Compartment Cover Removing and Replacing the Secure USB Compartment Cover1Removing the secure USB compartment cover Replacing the Secure USB Compartment CoverRemoving the Side Access Panel and Metal Side Cover Replacing the Metal Side Cover and Side Access Panel Installing the USB Device Installing Thin Client OptionsRemoving and Replacing the Battery External Drives Table A-1HP t5145/t5540/t5545/t5630 Thin Client SpecificationsAppendix a Specifications Securing the Thin Client Security ProvisionsHP Quick Release Mounting the Thin ClientFigure C-2Connecting the HP Quick Release to the thin client Supported Mounting Options Figure C-4Connecting the thin clientFigure C-8Thin client mounted under desk HP Quick Release Non-supported Mounting Option Routine Thin Client Care Thin Client OperationSupported Orientations Page Non-supported Orientation Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Shipping Information Important Service Repair InformationShipping Preparation Index