1 Thin client operation
Routine thin client care
Use the following information to properly care for your thin client:
•Never operate the thin client with the outside panel removed.
•Keep the thin client away from excessive moisture, direct sunlight, and extreme heat and cold. For information about recommended temperature and humidity ranges for the thin client, see product specifications.
•Keep liquids away from the thin client and keyboard.
•Turn off the thin client and wipe the exterior with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.
Configuring the AB300X as an RS-232 Console
The following section describes how to create a terminal emulator session, how to create an auto log on user account, and how to configure the terminal emulator session to automatically launch when the thin client is rebooted for any reason.
NOTE: There is currently no method of saving these configuration parameters to a file that can be retrieved at a later time. Therefore, it is imperative that all configuration parameters are recorded for future use.
Creating a Terminal Emulator Session
To create a terminal emulator session, perform the following steps:
1.Connect the HP Thin Client unit using the supplied DB9 Serial Cable
2.Select Start→Programs→Connection Administrator.
3.Press the Add button.
4.Choose Terminal Emulation.
5.From the HP Connection Window, run the new terminal Emulation wizard.
6.Create a Connection Name for this section.
NOTE: Please note that the console solution supports two of the available teemCE
emulations: VT 100 and HP
7.If using the
Routine thin client care | 7 |