HP Stream 7 - 5709, Stream 7 - 5701 manual System board

Remove the speaker:

1.Remove the shield tape (1) that covers the speaker cables.

2.Make note of the location the speaker cables are soldered on the system board, and then unsolder the speaker cables (2) from the system board speaker connectors.

NOTE: When installing the speaker, the red speaker cable should be soldered to the system board speaker “positive” terminal. The black speaker cable should be soldered to the system board speaker “negative” terminal.

3.Remove the speaker (3).

4.If you need to replace the speaker rubber protector, lift the speaker rubber protector (4) to remove it.

Reverse this procedure to install the speaker and speaker rubber protector.

System board

Description	Spare part number
System board equipped with Atom Z3735G processor, 1 GB RAM memory, and 32 GB eMMC hard drive
(includes microphone, audio-out (headphone)/audio-in (microphone) jack, speaker, and micro USB 2.0
port)
For use only in Asia Pacific	796785-371
For use only in Canada	796785-DB1
For use only in the People's Republic of China	796785-AA1
For use only in Europe, the Middle East, and Africa	796785-021

22 Chapter 5 Removal and replacement procedures