QuickSpecs
HP ElitePad
Technical Specifications
| Power Management | USB selective suspend, Connected Standby | |
| Antenna Type | Dual high efficiency 5 band antennae with spatial diversity, mounted in the | |
|
| display enclosure |
|
| Form Factor | TFF, USB 2.0 interface |
|
| Weight | < 3.1 g |
|
GPS Module | GPS | Standalone, |
|
| GPS Bands | 1575.42 MHz |
|
|
| 1598.0625 - 1605.375 MHz GLONASS | |
|
|
|
|
AR6004 802.11a/b/g/n | Wireless LAN Standards | IEEE 802.11a |
|
2x2 WiFi + |
| IEEE 802.11b |
|
|
| IEEE 802.11g |
|
|
| IEEE 802.11n |
|
| Interoperability |
| |
| Frequency Band | 2.4 GHz and 5 GHz |
|
| Data Rates | 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps | |
|
| 802.11b: 1, 2, 5.5, 11 Mbps |
|
|
| 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps | |
|
| 802.11n: 66 possible data rates, ranging from 6 Mbps to 300 Mbps, depending | |
|
| on the combination of Bandwidth, Modulation Coding Scheme, and Guard | |
|
| Interval used, as defined in IEEE 802.11n specification | |
| Modulation | Direct Sequence Spread Spectrum | |
|
| DBPSK DQPSK, CCK, OFDM, BPSK, QPSK, | |
| Security1 | Supports 64- and | |
|
| 802.1x authentication types | |
|
| Multinational support with frequency bands and channels compliant to local | |
|
| regulations. |
|
| Media Access Protocol | CSMA/CA (Collision Avoidance) with ACK | |
| Network Architecture |
| |
| Models | Infrastructure (Access Point Required) | |
| Roaming | IEEE 802.11 compliant roaming between access points | |
| Output Power2 | 13.5 dBm , nominal |
|
| Power Consumption | Connected Standby/Air Plan mode: 10mW(BT included) | |
|
| Idle associated: 150 mW |
|
|
| Idle unassociated: 50 mW |
|
|
| Transmit: 2.0 W (max) |
|
|
| Receive: 1.6 W (max) |
|
| Power Management | ACPI compliant power management | |
|
| 802.11 compliant power saving mode | |
| Receiver Sensitivity | 2.4GHz | 54 Mbps: |
|
|
| Mbps: |
|
| 5GHz | 54Mbps: |
|
|
| MCS15: |
DA - 14471 North America — Version 26 — December 13, 2013 | Page 13 |