HP 7 Plus G2 - 1331 manual Rear-facing webcam

Page 25
Rear-facing webcam

Rear-facing webcam

Description

Spare part number

 

 

Rear-facing webcam (2.0-MP, fixed-focus, HD; includes cable)

790595-001

 

 

Before removing the rear-facing webcam, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 12).

5.Disconnect the battery cable from the system board (see Battery on page 14).

Remove the rear-facing webcam:

1.Disconnect the rear-facing webcam cable (1) from the system board.

2.Remove the rear-facing webcam (2) and cable from the molding built into the display panel assembly.

Manual backgroundManual background NOTE: If the rear-facing webcam rubber lens cover (3) should become lost or damaged when removing the rear-facing webcam, a replacement cover is available in the Rubber Kit, spare part number 790598-001.

Reverse this procedure to install the rear-facing webcam.

Rear-facing webcam 19

Image 25
Contents HP 7 Plus G2 Tablet Software terms Product noticeSafety warning notice iv Safety warning notice Table of contents Requirements for specific countries and regions Requirements for all countriesPower cord set requirements RecyclingWireless networking 1 Product descriptionPower requirements ServiceabilityPower button 2 External component identificationComponent Rear-facing webcamMicro USB 2.0 port Volume control buttonsAudio-out headphone/Audio-in Micro SD Card Reader slotLocating the product number and serial number 3 Illustrated parts catalogTablet major components Tablet major componentsSpare part number Audio jack light pipeSequential part number listing Miscellaneous parts5-V / 1-A AC adapter Cable KitSequential part number listing Service considerations 4 Removal and replacement preliminary requirementsCables and connectors Tools requiredElectrostatic discharge damage Grounding guidelinesPackaging and transporting guidelines Workstation guidelinesMaterial Equipment guidelinesVoltage protection level Tablet component replacement procedures 5 Removal and replacement proceduresBack cover The actuators are included in the back cover spare part kit 4. Remove the back coverBack cover Battery Battery 5. Remove the battery Reverse this procedure to install the batterySpare part number AntennaSpeaker 18 Chapter 5 Removal and replacement procedures 4. Remove the speaker Reverse this procedure to install the speakerRear-facing webcam Microphone Connector board System board 3 TouchScreen cable ZIF connector on system board 1 Connector board cable see Connector board on page4 XRay cable ZIF connector on system board 5 Power/volume button board cable ZIF connector on system boardFront-facing webcam Front-facing webcam Input power 6 SpecificationsMetric 19.3 cmRequirements for all countries 7 Power cord set requirementsRequirements for specific countries and regions 28 Chapter 7 Power cord set requirements 8 Recycling J jacks IndexT tablet
Related manuals
Manual 22 pages 21.39 Kb