HP 7 Plus G2 - 1331 manual Specifications, Metric, 19.3 cm, 11.7 cm, 0.9 cm, 287 g, Input power

Page 32
6Specifications

6Specifications

 

Metric

U.S.

 

 

 

Dimensions (portrait orientation)

 

 

 

 

 

Width

19.3 cm

7.6 in

 

 

 

Depth

11.7 cm

4.6 in

 

 

 

Height

0.9 cm

0.4 in

 

 

 

Weight (lowest weight configuration)

287 g

0.63 lb

 

 

 

Input power

 

 

The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated 100-240 V, 50/60 Hz.

NOTE: The tablet can operate on DC power using an industry-standard micro-B USB cable. The HP adapter included with the tablet is recommended for charging the tablet.

Temperature

Operating

5°C to 35°C

41°F to 95°F

 

 

 

Nonoperating

‑20°C to 60°C

‑4°F to 140°F

 

 

 

Relative humidity (non-condensing)

 

 

 

 

 

Operating

10% to 90%

 

 

 

 

Nonoperating

5% to 95%

 

 

 

 

Maximum altitude (unpressurized)

 

 

 

 

 

Operating

‑15 m to 3,048 m

‑50 ft to 10,000 ft

 

 

 

Nonoperating

‑15 m to 12,192 m

‑50 ft to 40,000 ft

NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device operates well within this range of temperatures.

26 Chapter 6 Specifications

Image 32
Contents HP 7 Plus G2 Tablet Product notice Software termsSafety warning notice iv Safety warning notice Table of contents Requirements for all countries Requirements for specific countries and regionsPower cord set requirements Recycling1 Product description Wireless networkingPower requirements Serviceability2 External component identification Power buttonComponent Rear-facing webcamVolume control buttons Micro USB 2.0 portAudio-out headphone/Audio-in Micro SD Card Reader slot3 Illustrated parts catalog Locating the product number and serial numberTablet major components Tablet major componentsSpare part number Audio jack light pipeMiscellaneous parts Sequential part number listing5-V / 1-A AC adapter Cable KitSequential part number listing 4 Removal and replacement preliminary requirements Service considerationsCables and connectors Tools requiredGrounding guidelines Electrostatic discharge damageWorkstation guidelines Packaging and transporting guidelinesVoltage protection level Equipment guidelinesMaterial Back cover 5 Removal and replacement proceduresTablet component replacement procedures Back cover 4. Remove the back coverThe actuators are included in the back cover spare part kit Battery 5. Remove the battery Reverse this procedure to install the battery BatteryAntenna Spare part numberSpeaker 4. Remove the speaker Reverse this procedure to install the speaker 18 Chapter 5 Removal and replacement proceduresRear-facing webcam Microphone Connector board System board 1 Connector board cable see Connector board on page 3 TouchScreen cable ZIF connector on system board4 XRay cable ZIF connector on system board 5 Power/volume button board cable ZIF connector on system boardFront-facing webcam Front-facing webcam 6 Specifications Input powerMetric 19.3 cmRequirements for specific countries and regions 7 Power cord set requirementsRequirements for all countries 28 Chapter 7 Power cord set requirements 8 Recycling Index J jacksT tablet
Related manuals
Manual 22 pages 21.39 Kb