Resulting Configuration, IN-FLASH Configuration

CONFIGURATION COMMANDS: (created on software version F.01.07) Switch A

HP ProCurve Switch 2524# erase start

Configuration will be deleted and device rebooted, continue [y/n]? y HP ProCurve Switch 2524# config t

HP ProCurve Switch 2524(config)# hostname Switch_A Switch_A(config)# int e 1-2,5-6,13,17 lacp active Switch_A(config)# wr mem

Switch_A(config)# end

CONFIGURATION COMMANDS: (created on software version F.01.07) Switch B

None. This switch is left in default configuration (LACP passive on all ports).

RESULTING CONFIGURATION:

Switch_A# sh config

; J4813A Configuration Editor; Created on release #F.01.07

time daylight-time-rule None hostname "Switch_A" interface 1

lacp Active exit

interface 2 lacp Active exit

interface 5 lacp Active exit

interface 6 lacp Active exit

interface 13 lacp Active exit

interface 17 lacp Active exit

ip timep dhcp

snmp-server community "public" Unrestricted vlan 1

name "DEFAULT_VLAN" untagged 1-26,Dyn1 ip address dhcp-bootp exit

©Copyright Hewlett-Packard Company, 2000.	Page 3
All rights reserved.