HP ST-C5USBVA-300, ST-C5USBV-300 manual Installation, Local Unit, Connect to the CPU

NTI R

Network Technologies Inc

XTENDEX USB

Sun 13W3 Video Connector

INSTALLATION

The Local Unit

Connect to the CPU

1.Plug the cables of the Local Unit into the back of the CPU. (See Fig. 1.)

a)Connect the blue 15HD cable from the Local Unit to the female VGA port on the back of the CPU.

b)Connect the USB Type A cable from the Local Unit to a female USB Type A port on the back of the CPU.

Note: If a SUN CPU is being connected, depending upon the video connector of the SUN CPU, it may be necessary to attach an NTI #13W3M-15HDF (SUN video port-to-VGA adapter) to the video port on the CPU first, and then connect the video cable to the adapter.

USB Type A male

+ -

(Rear View)

ST-C5USBV-300 Local Unit

(BLUE- VIDEO)

USB CPU	15HD male
	Video Connector

Figure 1- Connect the Local Unit to a CPU

c)If the Local Unit has Audio support (ST-C5USBVA-300 only), connect the black 3.5mm stereo plug into the "line out", "spkr", or "headphones" jack on the back of the CPU. (See Fig. 2)

Notes:

If all 3 jacks are available, use the jack marked "line out".

The "line out" jack is typically lime green and may be marked with this symbol

The "spkr" jack is typically orange, and may be marked with this symbol

The "headphones" jack may be marked with this symbol

5