HP PRO RX manual RAID Console Operations, Built-in Ethernet Configuration, Mail notification

PRO RX Installation and User’s Manual

4.7.Built-in Ethernet Configuration

The PRO RX has a built-in Ethernet Port. In addition to managing the RAID Console at the host computer, this allows the PRO RX to be managed via any computer on the network.

By default, the PRO RX uses DHCP to acquire and IP Address, you may also hardcode the IP address.

Use RAID Console from the host computer to configure the Built-in Ethernet Port. The NetherNet Config page is located at System Control > EtherNet Config.

4.8.E-mail notification

Setting up an e-mail event notification is easy using the built-in SMTP mail configuration option.

For the latest up-to-day procedure, please check the Tech Notes section of the Dulce support web site:

www.dulcesystems.com > Support > Tech Notes

Page 22

PRO RX Installation and User’s Manual

5. RAID Console Operations

5.1.Start RAID Console GUI

The RAID Console is where all of the management and maintenance of the storage unit is accomplished. After the installation process, the RAID Console is executed from your computer’s Web Browser.

5.1.1. Start Apple Mac RAID Console GUI

Double click on the Dulce RAID Console icon in the Dulce MRAID Install folder to launch the RAID Console. For quicker access, you may move the Dulce RAID Console icon to the dock.

•A Web Browser will open and the RAID Console starts

•Default login name is: admin

• Default password is: 0000 (four zeros)

•Welcome screen of RAID Console after successful login:

Page 23